You can perform some routine maintenance and checks on your own to keep your boiler working properly. However, sometimes the boiler will be beyond repair and a replacement will be required.
What type of boiler is being installed?
How long it takes to replace a boiler and install a new system depends on the type of boiler that you are replacing. Replacement of a combi-boiler with another combi-boiler is usually simple and can be completed within a single day.
Upgrading your system: If you are switching from a traditional boiler to a combi boiler, the installation could take up to 2-3 days due to additional pipework and possible reconfiguration of your system.
Where is the boiler located?
It is also important to consider the position of your boiler. The process will be much quicker if the boiler is installed at the same place as the previous one. If you are relocating your boiler, the work can take an extra day or two because additional electrical and plumbing work is required.
What is the condition of your existing system?
Although every installation is different, here’s an overview of how long it takes to replace a boiler.
* Straight swap (Same type, same location): 4-6 hrs.
* Upgrade from one type to another (e.g. Conventional to Combination): 1-3 Days
* Boiler relocation: Allow an additional day or two depending on the complexity.
A Gas Safe-registered engineer can give you an accurate estimate after assessing your home’s needs and the system. For Boiler Replacement Cheltenham, visit blu-fish.co.uk/gas-heating-services-cheltenham/new-boilers-cheltenham/
What Happens When a Boiler is Replaced?
To ensure that the boiler system is safe and efficient, you will need to take several steps.
- Inspection and removal of the old boiler: The engineer will inspect your current system, safely remove the old boiler from your home, and then replace it.
- The new location of the boiler must be prepared. This may involve laying out new pipes, making electrical connections or adjusting the flue.
- Installing a new boiler: The engineer will connect your new boiler to the heating and hot-water system.
- Testing and commissioning: After installation, the system will be thoroughly tested to make sure everything is working as it should.
- Handover and explanation: The engineer will answer all questions and explain how to use the boiler.
Did You Know?
Upgrade to a modern boiler that is energy efficient and can lower your energy bills up to 30 percent. Older boilers waste more energy, especially those older than 10 years.